Add Deery Super Stretch Crack Filler – 75 Boxes / 2,250 lbs and RynoWorx 10 Gallon Melter to your next purchase.
*RELIABLE ASPHALT PROTECTION – Filling cracks before they get worse helps prevent further damage on the asphalt foundation caused by moisture from water and ice. Crackfill creates a waterproof seal that saves your pavement from costlier repairs and replacement.
*FAST CURE TIME – Our fast-curing crackfiller dries in just 30 minutes under proper weather conditions, allowing you to use your pavement sooner! To ensure near-zero tracking when driving over the sealed cracks, allow the crackfill to dry for at least 4 hours or overnight. No rain should be forecasted within 48 hours after application to ensure that the material properly bonds with the cracks’ walls.
*SAFE AND RELIABLE MELTER KETTLE – The included Ryno Worx RY10MK Pro’s industry-first halo burner has an automatic flame-out sensor that shuts off the flow of propane into the burner in case the flame goes out accidentally.
*DESIGNED FOR LARGE JOBS – The RY10MK Pro’s 10-gallon kettle is powder-coated inside and out and can work optimally from -13°F to 104°F. You can melt enough crackfill to cover approximately 600 feet of cracks in one go!
*SMART INVESTMENT – The RynoWorx Melter offers safety, speed, and savings while our fast-drying crackfill is highly recommended even for areas with lots of ice and snow. Where else can you find a better combination?
Deery Super Stretch Crack Filler comes in 30 pound boxes for convenient lifting and fast melting. Just drop them in your asphalt kettle, melt, and go! This product can be used in oil-jacketed or direct-fired melters.
Why Choose Deery Super Stretch Crack Filler?
Commercial-grade asphalt crack filler used by airports country-wide.
Save money when buying a complete pallet vs. 1 box at a time.
10-year shelf life — store and use it as you need it.
Versatile — expands and contracts with your asphalt at both high and low temperatures. Salt-resistant.
Safely heat the product to 380-400°F, watching the thermometer to avoid overheating. No need to wait to apply it. This is pre-reacted and ready to go as soon as you reach the right temperature.
This parking lot crack filler should only be applied when the pavement’s temperature is 40°F (4°C) or warmer. You can use a torch or lance to heat the pavement if you need to fill cracks urgently at colder temperatures.
How to Apply Deery Super Stretch Crack Filler
To use, first clean the cracks so there is no dirt, dust, plants or loose aggregate. These could prevent the product from making a solid connection to the pavement around it. Make sure cracks are completely dry before you start to apply the asphalt crack filler. You can use a melter-applicator like our RY10, RY10 Pro, RY10 Elite, or a simple crack pour pot for this.
Be careful not to keep it at high heat for long periods of time. The parking lot crack filler can be cooled and reheated as needed. But prolonged heating can degrade the quality of the product. It can also void the warranty.
